What safety precautions should be paid attention to when operating industrial boilers!
Industrial boilers are used in the manufacturing process of various industries, and industrial boilers occupy a very important position in industrial development. Because of industrial boilers, industrial enterprises have enough thermal energy to carry out orderly and efficient production work. However, industrial boilers are comparatively “behemoths”, and the following safety matters must be kept in mind during operation.
Four precautions for industrial boiler operation
1. Check each valve carefully. There are many industrial boiler valves, including gas meter inlet and outlet valves, and various valves on the furnace body. When carrying out a boiler inspection, always close the main valve. When opening the furnace door, pay attention to the conditions in the furnace and pay attention to whether there is a gas leak. If something is found, check and repair it as soon as possible.
2. Inspect the flue of the industrial boiler. In all cases, keep the flue unobstructed. Do not stack flammable and explosive materials such as diesel and firecrackers around industrial boilers.
3. Carry out the ignition operation according to the system. When igniting an industrial boiler, we must pay attention to the order of fire and other gases, and not upside down to prevent explosion. At the same time, it should also be noted that when the burner is lit, it should be lit in order from top to bottom and from inside to outside.
4. Handle in case of emergency. If the blower suddenly stops due to a power outage, etc., the gas and air valves on all burners must be closed immediately.
The above four points must be paid special attention in the operation and operation of industrial boilers, otherwise it may cause danger due to improper operation. Please boiler operators must keep the above in mind to ensure the safe operation of the boiler!